Flash is required to view this map.

To download the most current version of Flash please click here. The link will direct you to the Adobe Flash installer page in a new window.

Overpressure Protection

TransCanada is required to demonstrate that all Receipt Meter Stations are protected from possible overpressure incidents. Thus TransCanada requires all Customers at receipt facilities to provide pressure protection to ensure that the Maximum Receipt Pressure of the Meter Station is not exceeded and report the protection system in place.

We will work collaboratively with Customers  to ensure that the Pressure Control (PC) and Overpressure Protection (OPP) system meets the requirements of CSA Z662-2015.

TransCanada requires the cooperation of all Customers to provide the following initial information:

  • Basic information about the Customer’s facility
  • Process & Instrument Diagram (P&ID) or as-built drawings
  • Operational philosophy
  • Planned maintenance program for the OPP devices and system
  • OPP devices calibration or maintenance records

Following the initial information gathering, TransCanada only needs to verify PC and OPP devices and systems on an annual basis.

If the PC and OPP system changes it is the Customer’s obligation to notify TransCanada.

 

The forms are located on the right-hand side of this page.

Related Information

Check our Frequently Asked Questions to see if your questions have already been answered.

FORMS